User Manual

interface port1.1
switchport
...
!
line con 0
line vty 0 7
!
end
SWP2#
4.3.5 Show startup configuration
[Syntax]
show startup-config
[Input mode]
priviledged EXEC mode
[Description]
Shows the startup settings (startup configuration).
[Note]
The startup configuration that is shown is determined by the unit's DIP switch #1 at the time that the unit is started.
[Example]
Shows the startup settings (startup configuration) at next startup.
SWP2#show startup-config
!
! Last Modified: Mon Jan 01 00:00:00 UTC 2018
!
qos enable
qos dscp-queue 0 0
qos dscp-queue 1 0
qos dscp-queue 2 0
qos dscp-queue 3 0
qos dscp-queue 4 0
...
!
telnet-server enable
!
line con 0
line vty 0 7
!
end
SWP2#
4.3.6 Show backup configuration
[Syntax]
show backup-config
[Input mode]
priviledged EXEC mode
[Description]
Shows the backup settings (backup configuration).
[Note]
Executing this command while operating in USER mode results in an error.
[Example]
Show the backup configuration.
SWP2#show backup-config
!
! Last backup: Fri Sep 7 00:00:00 UTC 2018
!
36 | Command Reference | Maintenance and operation functions