User Manual

community : Community name (eventCommunity)
Maximum 127 characters
This can be specified if type is "trap" or "log-trap".
description : Description of event (eventDescription)
Maximum 127 characters
(if omitted : RMON_SNMP)
owner : Name of event group owner (eventOwner)
Maximum 127 characters
(if omitted : RMON_SNMP)
[Initial value]
none
[Input mode]
global configuration mode
[Description]
Enables the RMON event group settings.
If this command is set, it will be possible to acquire the RMON MIB's eventTable. Use the rmon alarm command to set the
event group for this command.
If this command is executed with the "no" syntax, the setting value is deleted.
[Note]
To enable the event group setting of the RMON function, it is necessary to enable the system-wide RMON function in addition
to this command.
In order for RMON to send an SNMP trap, you must have made SNMP trap transmission settings.
[Example]
After making SNMP trap settings, enable the RMON event group setting. Set the type of event as "log-trap", and the
community name of the trap as "public".
SWP2(config)#snmp-server host 192.168.100.3 traps version 2c public
SWP2(config)#snmp-server enable trap rmon
SWP2(config)#rmon event 1 log-trap public
4.11.5 Set RMON alarm group
[Syntax]
rmon alarm index variable interval interval [type]
rising-threshold rising_threshold event rising_event-index
falling-threshold falling_threshold event falling_event_index [alarmstartup startup] [owner owner]
rmon alarm index variable interval interval [type] rising-threshold rising_threshold event rising_event-index
[owner owner]
rmon alarm index variable interval interval [type] falling-threshold falling_threshold event falling_event_index
[owner owner]
no rmon alarm index
[Parameter]
index : <1-65535>
Index of alarm group (alarmIndex)
variable : MIB object to be monitored (alarmVariable)
interval : <1-2147483647>
Sampling interval (seconds)(alarmInterval)
type : Sampling type (alarmSampleType)
Command Reference | Maintenance and operation functions | 61