User Manual

[Description]
Configures the settings for e-mail notification of event information for the specified function.
[Example]
Sets the terminal monitoring function event trigger for e-mail template #1.
SWP2(config)#mail notify 1 trigger terminal
4.18.4 E-mail transmission template settings mode
[Syntax]
mail temlate temp-id
no temlate
[Parameter]
temp-id : <1-10>
E-mail template ID
[Initial value]
none
[Input mode]
global configuration mode
[Description]
Switches to the mode for setting the template used when sending e-mails.
The following items can be configured after switching to template mode. Up to 10 templates can be created.
• E-mail transmission destination address
•
E-mail transmission source address
• Subject of e-mails sent
• Wait time settings for e-mail transmission (only event notification used)
[Example]
Switches to the mode for setting e-mail template #1.
SWP2(config)#mail template 1
SWP2(config-mail)#
4.18.5 E-mail transmission server ID settings
[Syntax]
send server server-id
no send server
[Parameter]
server-id : <1-10>
E-mail template ID
[Initial value]
no send server
[Input mode]
E-mail template mode
[Description]
Sets the ID of the e-mail server to be used.
[Example]
Specifies server ID #1 for the e-mail server used in e-mail template #1.
SWP2(config)#mail template 1
SWP2(config-mail)#send server 1
Command Reference | Maintenance and operation functions | 83