User Manual

“MAC address” Shows the MAC address of the device.
“IP address”
Shows the IPv4 address of the device.
As with the “Connected Devices” view, you can use the opens the Web
browser button.
“Firmware revision” Shows the firmware revision of the device.
“Date and time of
last CONFIG import”
Shows the date and time of the last CONFIG import.
When you perform a CONFIG import, the information to be displayed in
this area will be saved.
This information will also be saved in the exported “Label Settings
file”.
“CONFIG file of last
import”
Shows the file path of the last imported CONFIG file.
When you perform a CONFIG import, the information to be displayed in
this area will be saved.
This information will also be saved in the exported “Label Settings
file”.
“Comment” Allows you to freely assign a comment. You can enter information
about the on-site cabling or the role of the device.
This is the same as the “Comment” used in the “Connected Devices”
view.

NOTE
When using the snapshot function, as well as the “Connected Devices” view, if
a device saved in the snapshot is no longer found, the corresponding device is
shown in red. If a device that had not been saved previously is newly found, the
corresponding device is shown in blue.
❽ “Setting” button
This button opens the “Device Settings” dialog.
10. List screen
Yamaha LAN Monitor for Win User Guide | 43