User Manual
Table Of Contents
- 目次
- はじめに
- コマンドリファレンスの見方
- コマンドの使い方
- コンフィグレーション
- 保守・運用機能
- 4.1 パスワード
- 4.2 ユーザーアカウント管理
- 4.3 コンフィグの管理
- 4.4 起動情報の管理
- 4.5 筐体情報表示
- 4.6 システム自己診断
- 4.7 ケーブル診断
- 4.8 時刻管理
- 4.9 端末設定
- 4.10 保守
- 4.11 SYSLOG
- 4.12 SNMP
- 4.12.1 SNMP通知メッセージの送信先ホストの設定
- 4.12.2 システム起動時に通知メッセージを送信するまでの待機時間の設定
- 4.12.3 送信する通知メッセージタイプの設定
- 4.12.4 システムコンタクトの設定
- 4.12.5 システムロケーションの設定
- 4.12.6 SNMPコミュニティーの設定
- 4.12.7 SNMPビューの設定
- 4.12.8 SNMPグループの設定
- 4.12.9 SNMPユーザーの設定
- 4.12.10 SNMPサーバーへアクセスできるクライアントのIPアドレス制限
- 4.12.11 SNMPコミュニティーの情報の表示
- 4.12.12 SNMPビューの設定内容の表示
- 4.12.13 SNMPグループの設定内容の表示
- 4.12.14 SNMPユーザーの設定内容の表示
- 4.13 RMON
- 4.14 TELNETサーバー
- 4.15 TELNETクライアント
- 4.16 TFTPサーバー
- 4.17 HTTPサーバー
- 4.18 SSHサーバー
- 4.19 SSHクライアント
- 4.20 メール通知
- 4.21 LLDP
- 4.21.1 LLDP機能の有効化
- 4.21.2 システムの説明文の設定
- 4.21.3 システムの名称の設定
- 4.21.4 LLDP エージェントの作成
- 4.21.5 LLDPによる自動設定機能の設定
- 4.21.6 LLDP 送受信モードの設定
- 4.21.7 管理アドレスの種類の設定
- 4.21.8 基本管理 TLV の設定
- 4.21.9 IEEE-802.1 TLV の設定
- 4.21.10 IEEE-802.3 TLV の設定
- 4.21.11 LLDP-MED TLV の設定
- 4.21.12 LLDP フレームの送信間隔の設定
- 4.21.13 高速送信期間の LLDP フレーム送信間隔の設定
- 4.21.14 LLDP フレーム送信停止から再初期化までの時間の設定
- 4.21.15 機器情報の保持時間(TTL)を算出するための乗数の設定
- 4.21.16 高速送信期間の LLDP フレーム送信個数の設定
- 4.21.17 ポート単位で管理できる機器の最大接続台数の設定
- 4.21.18 LLDP機能のインターフェース一括設定
- 4.21.19 インターフェースの状態表示
- 4.21.20 全てのインターフェースにおける接続機器の情報表示
- 4.21.21 LLDP フレームカウンターのクリア
- 4.22 L2MS (Layer 2 management service)の設定
- 4.23 スナップショット
- 4.24 ファームウェア更新
- 4.25 スケジュール
- 4.26 保守運用一般
- インターフェース制御
- 5.1 インターフェース基本設定
- 5.1.1 説明文の設定
- 5.1.2 シャットダウン
- 5.1.3 通信速度・通信モードの設定
- 5.1.4 MRU設定
- 5.1.5 クロス/ストレート自動判別設定
- 5.1.6 EEE設定
- 5.1.7 EEE対応可否を表示する
- 5.1.8 EEEステータス情報を表示する
- 5.1.9 ポートミラーリングの設定
- 5.1.10 ポートミラーリングの状態表示
- 5.1.11 インターフェースの状態表示
- 5.1.12 インターフェースの状態の簡易表示
- 5.1.13 インターフェースのリセット
- 5.1.14 フレームカウンター表示
- 5.1.15 フレームカウンターのクリア
- 5.1.16 SFP+モジュールの状態表示
- 5.1.17 SFP+モジュールの受光レベル監視の設定
- 5.1.18 送信キューの使用率監視の設定(システム)
- 5.1.19 送信キューの使用率監視の設定(インターフェース)
- 5.1.20 送信キューの使用率監視の設定表示
- 5.2 リンクアグリゲーション
- 5.2.1 スタティック論理インターフェースの設定
- 5.2.2 スタティック論理インターフェースの状態表示
- 5.2.3 LACP論理インターフェースの設定
- 5.2.4 LACP論理インターフェースの状態表示
- 5.2.5 LACPシステム優先度の設定
- 5.2.6 LACPシステム優先度の表示
- 5.2.7 LACP異速度リンクアグリゲーションの設定
- 5.2.8 LACPタイムアウトの設定
- 5.2.9 LACPフレームカウンターのクリア
- 5.2.10 LACPフレームカウンターの表示
- 5.2.11 ロードバランス機能のルールの設定
- 5.2.12 LACP論理インターフェースのプロトコル状態表示
- 5.2.13 LACPポート優先度の設定
- 5.3 ポート認証
- 5.3.1 システム全体でのIEEE 802.1X認証機能の設定
- 5.3.2 システム全体でのMAC認証機能の設定
- 5.3.3 システム全体でのWeb認証機能の設定
- 5.3.4 IEEE 802.1X認証機能の動作モード設定
- 5.3.5 IEEE 802.1X認証の未認証ポートでの転送制御の設定
- 5.3.6 EAPOLパケットの送信回数の設定
- 5.3.7 MAC認証機能の設定
- 5.3.8 MAC認証時のMACアドレス形式の設定
- 5.3.9 MAC認証のスタティック登録の設定
- 5.3.10 Web認証機能の設定
- 5.3.11 ホストモードの設定
- 5.3.12 認証順序の設定
- 5.3.13 再認証の設定
- 5.3.14 ダイナミックVLANの設定
- 5.3.15 ゲストVLANの設定
- 5.3.16 認証失敗後の抑止期間の設定
- 5.3.17 再認証間隔の設定
- 5.3.18 RADIUSサーバー全体の応答待ち時間の設定
- 5.3.19 サプリカント応答待ち時間の設定
- 5.3.20 RADIUSサーバーホストの設定
- 5.3.21 RADIUSサーバー1台あたりの応答待ち時間の設定
- 5.3.22 RADIUSサーバーへの要求再送回数の設定
- 5.3.23 RADIUSサーバー共有パスワードの設定
- 5.3.24 RADIUSサーバー使用抑制時間の設定
- 5.3.25 RADIUSサーバーに通知するNAS-Identifier属性の設定
- 5.3.26 ポート認証情報の表示
- 5.3.27 サプリカント情報の表示
- 5.3.28 統計情報の表示
- 5.3.29 統計情報のクリア
- 5.3.30 RADIUSサーバー設定情報の表示
- 5.3.31 Web認証成功後のリダイレクト先URLの設定
- 5.3.32 認証状態のクリア
- 5.3.33 認証状態のクリアする時刻の設定(システム)
- 5.3.34 認証状態のクリアする時刻の設定(インターフェース)
- 5.3.35 EAPパススルーの設定
- 5.4 ポートセキュリティー
- 5.5 エラー検出機能
- 5.1 インターフェース基本設定
- Layer 2機能
- 6.1 FDB(フォワーディングデータベース)
- 6.2 VLAN
- 6.2.1 VLANモードへの移行
- 6.2.2 VLANインターフェースの設定
- 6.2.3 プライベートVLANの設定
- 6.2.4 プライマリーVLANに対するセカンダリーVLANの設定
- 6.2.5 アクセスポート(タグなしポート)の設定
- 6.2.6 アクセスポート(タグなしポート)の所属VLANの設定
- 6.2.7 トランクポート(タグ付きポート)の設定
- 6.2.8 トランクポート(タグ付きポート)の所属VLANの設定
- 6.2.9 トランクポート(タグ付きポート)のネイティブVLANの設定
- 6.2.10 プライベートVLANのポート種別の設定
- 6.2.11 プライベートVLANのホストポートの設定
- 6.2.12 プライベートVLANのプロミスカスポートの設定
- 6.2.13 ボイスVLANの設定
- 6.2.14 ボイスVLANのCoS値の設定
- 6.2.15 ボイスVLANのDSCP値の設定
- 6.2.16 マルチプルVLANグループの設定
- 6.2.17 マルチプルVLANグループの名前の設定
- 6.2.18 マルチプルVLAN設定時のYMPIフレーム透過機能の設定
- 6.2.19 VLAN情報の表示
- 6.2.20 プライベートVLAN情報の表示
- 6.2.21 マルチプルVLANグループ設定情報の表示
- 6.3 STP(スパニングツリープロトコル)
- 6.3.1 システムのスパニングツリーの設定
- 6.3.2 転送遅延時間の設定
- 6.3.3 最大エージング時間の設定
- 6.3.4 ブリッジプライオリティの設定
- 6.3.5 インターフェースのスパニングツリーの設定
- 6.3.6 インターフェースのリンクタイプの設定
- 6.3.7 インターフェースのBPDUフィルタリングの設定
- 6.3.8 インターフェースのBPDUガードの設定
- 6.3.9 インターフェースのパスコストの設定
- 6.3.10 インターフェースのプライオリティの設定
- 6.3.11 インターフェースのエッジポートの設定
- 6.3.12 スパニングツリーの状態表示
- 6.3.13 スパニングツリーのBPDUの統計情報の表示
- 6.3.14 プロトコル互換モードのクリア
- 6.3.15 MSTモードへの移行
- 6.3.16 MSTインスタンスの生成
- 6.3.17 MSTインスタンスに対するVLANの設定
- 6.3.18 MSTインスタンスのプライオリティの設定
- 6.3.19 MSTリージョン名の設定
- 6.3.20 MSTリージョンのリビジョン番号の設定
- 6.3.21 インターフェースに対するMSTインスタンスの設定
- 6.3.22 MSTインスタンスにおけるインターフェースのプライオリティの設定
- 6.3.23 MSTインスタンスにおけるインターフェースのパスコストの設定
- 6.3.24 MSTリージョン情報の表示
- 6.3.25 MSTP情報の表示
- 6.3.26 MSTインスタンス情報の表示
- 6.4 ループ検出
- Layer 3機能
- IPマルチキャスト制御
- 8.1 IP マルチキャスト基本設定
- 8.2 IGMPスヌーピング
- 8.2.1 IGMPスヌーピングの有効/無効設定
- 8.2.2 IGMPスヌーピング高速脱退の設定
- 8.2.3 マルチキャストルーターの接続先の設定
- 8.2.4 クエリー送信機能の設定
- 8.2.5 IGMPクエリー送信間隔の設定
- 8.2.6 IGMPパケットのTTL値検証機能の設定
- 8.2.7 IGMPバージョンの設定
- 8.2.8 IGMPレポート抑制機能の設定
- 8.2.9 マルチキャストルーターポートへのデータ転送抑制機能の設定
- 8.2.10 マルチキャストルーター接続ポート情報の表示
- 8.2.11 IGMPグループメンバーシップ情報の表示
- 8.2.12 インターフェースのIGMP関連情報を表示
- 8.2.13 IGMPグループメンバーシップのエントリー削除
- 8.3 MLDスヌーピング
- トラフィック制御
- 9.1 ACL
- 9.1.1 IPv4アクセスリストの生成
- 9.1.2 IPv4アクセスリストの説明文追加
- 9.1.3 IPv4アクセスリストの適用
- 9.1.4 IPv6アクセスリストの生成
- 9.1.5 IPv6アクセスリストの説明文追加
- 9.1.6 IPv6アクセスリストの適用
- 9.1.7 MACアクセスリストの生成
- 9.1.8 MACアクセスリストの説明文追加
- 9.1.9 MACアクセスリストの適用
- 9.1.10 生成したアクセスリストの表示
- 9.1.11 統計数のクリア
- 9.1.12 インターフェースに適用したアクセスリストの表示
- 9.1.13 VLANアクセスマップの設定およびVLANアクセスマップモードへの移行
- 9.1.14 VLANアクセスマップに対するアクセスリストの設定
- 9.1.15 VLANアクセスマップフィルターの設定
- 9.1.16 VLANアクセスマップの表示
- 9.1.17 VLANアクセスマップフィルターの表示
- 9.2 QoS (Quality of Service)
- 9.2.1 QoSの有効・無効制御
- 9.2.2 デフォルトCoSの設定
- 9.2.3 トラストモードの設定
- 9.2.4 QoS機能の設定状態の表示
- 9.2.5 インターフェースのQoS情報の表示
- 9.2.6 送信キュー使用率の表示
- 9.2.7 CoS-送信キューID変換テーブルの設定
- 9.2.8 DSCP-送信キューID変換テーブルの設定
- 9.2.9 ポート優先度の設定
- 9.2.10 スイッチ本体から送信されるフレームの送信キュー指定
- 9.2.11 クラスマップ(トラフィックの分類条件)の生成
- 9.2.12 クラスマップの関連付け
- 9.2.13 トラフィック分類条件の設定(access-list)
- 9.2.14 トラフィック分類条件の設定(CoS)
- 9.2.15 トラフィック分類条件の設定(TOS優先度)
- 9.2.16 トラフィック分類条件の設定(DSCP)
- 9.2.17 トラフィック分類条件の設定(Ethernet Type)
- 9.2.18 トラフィック分類条件の設定(VLAN ID)
- 9.2.19 トラフィック分類条件の設定(VLAN IDレンジ指定)
- 9.2.20 クラスマップ情報の表示
- 9.2.21 受信フレームに対するポリシーマップの生成
- 9.2.22 受信フレームに対するポリシーマップの適用
- 9.2.23 プレマーキングの設定(CoS)
- 9.2.24 プレマーキングの設定(TOS優先度)
- 9.2.25 プレマーキングの設定(DSCP)
- 9.2.26 個別ポリサーの設定(シングルレート)
- 9.2.27 個別ポリサーの設定(ツインレート)
- 9.2.28 個別ポリサーのリマーキングの設定
- 9.2.29 集約ポリサーの生成
- 9.2.30 集約ポリサーの設定(シングルレート)
- 9.2.31 集約ポリサーの設定(ツインレート)
- 9.2.32 集約ポリサーのリマーキングの設定
- 9.2.33 集約ポリサーの表示
- 9.2.34 集約ポリサーの適用
- 9.2.35 メータリングカウンターの表示
- 9.2.36 メータリングカウンターのクリア
- 9.2.37 送信キューの指定(CoS-Queue)
- 9.2.38 送信キューの指定(DSCP-Queue)
- 9.2.39 ポリシーマップ情報の表示
- 9.2.40 マップステータスの表示
- 9.2.41 送信キューのスケジューリング設定
- 9.2.42 トラフィックシェーピング(ポート単位)の設定
- 9.2.43 トラフィックシェーピング(キュー単位)の設定
- 9.3 フロー制御
- 9.4 ストーム制御
- 9.1 ACL
- アプリケーション
- 10.1 ローカルRADIUSサーバー
- 10.1.1 ローカルRADIUSサーバー機能の設定
- 10.1.2 アクセスインターフェースの設定
- 10.1.3 ルート認証局を生成
- 10.1.4 RADIUSコンフィグレーションモード
- 10.1.5 認証方式の設定
- 10.1.6 RADIUSクライアント(NAS)の設定
- 10.1.7 認証ユーザーの設定
- 10.1.8 再認証間隔の設定
- 10.1.9 ローカルRADIUSサーバーへの設定データ反映
- 10.1.10 クライアント証明書の発行
- 10.1.11 クライアント証明書の発行中断
- 10.1.12 クライアント証明書の失効
- 10.1.13 クライアント証明書のエクスポート(メール送信)
- 10.1.14 RADIUSクライアント(NAS)の表示
- 10.1.15 認証ユーザー情報の表示
- 10.1.16 クライアント証明書の発行状態表示
- 10.1.17 クライアント証明書のリスト表示
- 10.1.18 クライアント証明書の失効リスト表示
- 10.1 ローカルRADIUSサーバー
- 索引
以下の項目が表示される。
show lldp interface ifname の場合
• インターフェース及びその統計情報
Agent Mode
ブリッジモード(Nearest bridge 固定)
Enable (tx/rx)
送信モード/受信モード (Y:可能、N:不可)
Message fast transmit time
高速送信期間の LLDP フレーム送信間隔(秒)
Message transmission interval
LLDP フレーム送信間隔(秒)
Reinitialisation delay
送信停止後から再初期化までの時間(秒)
MED Enabled
LLDP-MED TLV 送信の有効/無効
Device Type
デバイスタイプ(NETWORK_CONNECTIVITY 固定)
Total frames transmitted
LLDP フレームの送信数
Total entries aged
TTL 秒以上受信がなく、管理テーブルから削除された機
器の数
Total frames received
LLDP フレームの受信数
Total frames received in error
LLDP フレームの受信エラー数
Total frames discarded
破棄された LLDP フレームの数
Total discarded TLVs
破棄された TLV の数
Total unrecognised TLVs
認識できなかった TLV の数
show lldp interface ifname neighbor の場合
• 基本管理情報
Interface Name
受信したインターフェース名
System Name
システム名称
System Description
システムの説明
Port Description
ポートの説明
System Capabilities
システムの能力
Interface Numbering
インターフェース番号のタイプ
Interface Number
インターフェース番号
OID Number
OID 番号
Management Address
MAC アドレスまたは IP アドレス
• Mandatory TLV の情報
CHASSIS ID TYPE
CHASSIS ID TLV のタイプと値
PORT ID TYPE
PORT ID TLV のタイプと値
TTL (Time To Live)
機器情報の保持時間(秒)
• 8021 ORIGIN SPECIFIC TLV の情報
Port Vlan id
ポート VLAN の ID
PP Vlan id
プロトコル VLAN の ID
VLAN ID
ポート VLAN の ID
VLAN Name
ポート VLAN の名称
Remote Protocols Advertised
サポートするプロトコルのリスト
Remote VID Usage Digestt
VID Usage Digestt 値
108 | コマンドリファレンス | 保守・運用機能