User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Notes regarding when using macOS10.15.x or later
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Main screen
- Web GUI
- Resources
- Troubleshooting
Resources
Yamaha LAN Monitor for Mac User Guide
41
Error messages
Messages shown in the Result of searching area for Device search
A device search using one or more IP addresses can return the following messages in the Result of searching area.
X.X.X.X indicates the IP address of a target device that was pinged or searched for.
Check box operations
You can turn the following check box operations on and off.
• Mouse click
• Pressing the space key while selected
• Pressing the Enter key while selected
Messages
There is no OUI file. Backup the necessary information, and re-install.
The OUI file could not be loaded. Backup the necessary information, and re-install.
The data folder could not be created.
Failed to start the specified snapshot file.
Message Description
X.X.X.X : Reply received. A ping reply was returned from the target device.
X.X.X.X : Request timed out. A ping reply was not returned from the target device.
* This message is not shown for [IP address range] and [Auto search in
local network].
X.X.X.X : Destination unreachable. The search target does not exist.
* This message is not shown for [IP address range] and [Auto search in
local network].
X.X.X.X : An internal error occurred. An internal error has occurred.