User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Main screen
- Web GUI
- Resources
- Troubleshooting
Main screen
Yamaha LAN Monitor for Win User Guide
26
For the SWX2110/SWX2110P/SWX2200 series Yamaha switch
Use this to view or change the settings.
The tabs shown at the top of the dialog allow you to switch between information displays.
• [Switch settings] tab: View or configure the settings of the Yamaha switch.
• [Port settings] tab: Configure basic functions, VLAN, and other settings for each port.
Switch settings
Of the following items, only the setting items marked with ✓ are displayed.
Items
SWX2110/
SWX2110P
series
SWX2200
series
Descriptions
Device name
✓✓
Changes the device name.
Click the [Settings] button to display the “Device name”
dialog box.
Label
✓✓
Allows you to enter a label that distinguishes the
individual device.
Click the [Settings] button to display the “Label” dialog
box.
Comment
✓✓
Allows you to enter a comment.
Click the [Settings] button to display the “Comment”
dialog box.
Snapshot ✓✓
Cannot be changed. This is fixed to “On.”
Power
conservation
✕✓
Configures the power conservation settings.
Click the [Settings] button to display the “Power
conservation” dialog box.
LED mode
✓✕
Configures the LED mode settings.
Click the [Settings] button to display the “LED mode”
dialog box.
EEE
✓✕
Configures the EEE settings.
Click the [Settings] button to display the “EEE” dialog
box.
Flow control
✓✕
Configures the flow control settings.
Click the [Settings] button to display the “Flow control”
dialog box.