User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
Configuring the device
Yamaha LAN Monitor for Win User Guide
37
Power
conservation
✕✓
Configures the power conservation settings.
Click the [Settings] button to display the “Power
conservation” dialog box.
LED mode
✓✕
Configures the LED mode settings.
Click the [Settings] button to display the “LED mode”
dialog box.
EEE
✓✕
Configures the EEE settings.
Click the [Settings] button to display the “EEE” dialog
box.
Flow control
✓✕
Configures the flow control settings.
Click the [Settings] button to display the “Flow control”
dialog box.
Loop detection
✓✓
Configures the action of the switch when a loop is
detected.
Click the [Settings] button to display the “Loop detection”
dialog box.
Port mirroring
✓✓
Configures the port mirroring settings of the switch.
On the SWX2200 series, click the arrow ( ) to display
the [Settings] button.
Click the [Settings] button to display the “Port mirroring”
dialog box.
QoS
✓✕
Configures the QoS settings.
Click the [Settings] button to display the “QoS” dialog
box.
IGMP Snooping
✓✕
Configures the IGMP snooping settings.
Click the [Settings] button to display the “IGMP
Snooping” dialog box.
Frame counter
reset
✓✓
Resets the frame counter.
Click the [Execute] button to display a “Frame counter
reset” confirmation message.
Firmware Update
✓✓
Updates the firmware of the switch.
Click the [Execute] button to display the “Firmware
Update” dialog box.
CONFIG export
✓✕
Export the CONFIG of the switch.
Click the [Execute] button to display the “CONFIG
export” dialog.
CONFIG import
✓✕
Import the CONFIG of the switch.
Click the [Execute] button to display the “CONFIG
import” dialog.
Restart
✓✓
Restarts the switch.
Click the [Execute] button to display a “Restart”
confirmation message.
Initialize
✓✓
Initializes the switch.
Click the [Execute] button to display an “Initialize”
confirmation message.
Items
SWX2110/
SWX2110P
series
SWX2200
series
Descriptions