User Manual

[Parameter]
zone : UTC, JST
Name of the time zone shown when standard time is in effect
offset : -12:00, -11:00, ... , -1:00, +1:00, ... , +13:00
Enter the difference from UTC
[Initial value]
clock timezone UTC
[Input mode]
global configuration mode
[Description]
Sets the time zone.
If this command is executed with the "no" syntax, UTC is specified.
[Example]
Set the time zone to JST.
SWP2(config)#clock timezone JST
Set the time zone to UTC+9 hours.
SWP2(config)#clock timezone +9:00
4.8.3 Configuring daylight saving time (recurring)
[Syntax]
clock summer-time name recurring week wday month time week wday month time [offset]
no clock summer-time
[Parameter]
name : Time zone name to be displayed when daylight saving time is in effect
Alphanumeric characters (up to 7 characters)
week : <1-4> or first, last
Specifies the week of the month
wday : Sun, Mon, Tue, ... , Sat
Day of the week
month : <1-12> or Jan, Feb, Mar, ... , Dec
Month or month name
time : hh:mm
Time
offset : <1-1440>
Time to add during daylight saving time. Specify in minutes. The default value is 60.
[Initial value]
None
[Input mode]
global configuration mode
[Description]
Configure daylight saving time.
Configure daylight saving time to start and end on a specified week and day of the week every year.
The first part specifies the daylight saving time start period and the second part specifies the end period.
If this command is executed with the "no" syntax, the setting is cleared.
46 | Command Reference | Maintenance and operation functions