User Manual

Menu bar
Yamaha LAN Monitor for Win User Guide
13

[Import Label Settings]
Opens the “Import Label Settings” dialog box.
Loads device labels displayed in the “Connected Devices” view from a file.
 [Export Label Settings]
Opens the “Export Label Settings” dialog box.
Saves device labels specified in the “Connected Devices” view as a file. The saved file has a filename extension
of “.nml.”
 [Basic Settings]
Opens the “Basic Settings” dialog box.
Displays a dialog box in which you can make basic settings for Yamaha LAN Monitor.
1 Slave monitoring time interval
Set the slave monitoring time interval in seconds.
Setting range: 2 – 10 sec
Default: 3 sec
This will detect the slave and update the Map screen every time the set amount of seconds elapses.
2 Monitoring times until slave disappearance is detected
Set the monitoring times until slave disappearance is detected.
Setting range: 2 – 10 times
Default: 3 times
If the search packets have been sent for the set number of times without receiving a response packet from
the slave, the corresponding slave is assumed lost.
3 Information update interval of the selected slave
Set the interval used when retrieving information for the currently selected slave in the tree view.
Whenever the number of seconds set here elapses, various information will be retrieved from the currently
selected slave in the tree view.
You can reduce Yamaha LAN Monitor’s processing load by setting the update interval to a longer value.
• Status of each function:
Sets the interval in seconds at which information other than bandwidth usage is retrieved.
Setting range: 3 – 300 sec
Default: 10 sec
•Bandwidth:
Sets the interval in seconds at which bandwidth usage information is retrieved.
Setting range: 3 – 300 sec
Default: 3 sec
1
2
3
4
5
❻
❼
❽
❾❿