User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Mac
3. Starting and exiting Yamaha LAN Monitor
3.1. Starting
Start Yamaha LAN Monitor in one of the following ways.
A different startup sequence is used when directly starting up Yamaha LAN Monitor, and when
starting it up from a snapshot file (nms file) saved on your computer.
•
Start Yamaha LAN Monitor from the Finder or from the LaunchPad.
Load a snapshot file held by Yamaha LAN Monitor to display comparison results for the current
network status and the snapshot file in the “Tree” view. If there is no snapshot file, only the
current network status appears in the “Tree” view.
• Double click a snapshot file (.nms file) saved to your computer to start up Yamaha LAN
Monitor.
Load the double clicked snapshot file to display comparison results for the current network
status and the snapshot file in the “Tree” view.
NOTE
Snapshot is a function that stores the network connection status to Yamaha
LAN Monitor. A snapshot file is a .nms file with snapshot data written to it.
For more information about the snapshot function, refer to “Using the
snapshot function”.
3.2. Exiting
Exit Yamaha LAN Monitor in one of the following ways.
• Select the [LANMonitor] menu in the menu bar, then click [Quit LANMonitor].
3. Starting and exiting Yamaha LAN Monitor
10 | Yamaha LAN Monitor for Mac User Guide