User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Mac
◦ Setting range: 1 – 1800 sec
◦ Default: 10 sec
•
Wait time for reply:
Set the wait time for reply to pings in seconds.
◦ Setting range: 1 – 60 sec
◦ Default: 1 sec
•
Number of failure for detecting down:
Set the number of failures before a connection is detected as being down.
◦ Setting range: 1 – 100 times
◦ Default: 3 times
❻ Power supply interruption time
Suspends the power supply when a disrupted or inactive connection is detected. Set the power
supply interruption time in seconds in case of interruption.
• Setting range: 1 – 60 sec
• Default: 5 sec
❼ Preview size of the Whole map
Select the size of the preview image of the “Whole map” generated for print preview and
printing.
If printing or previewing the “Whole map” has failed, the failure may be avoided by setting the
preview size to A6.
❽ Snapshot function
•
“Treat equipment as comparison for snapshots” check box:
Clear this check box to exclude devices as targets for comparisons.
◦ Default: Selected
❾ [OK] button
Applies the configured settings.
NOTE
• The [OK] button is only available when acceptable input values have been
input.
• Click the [OK] button to reset the monitoring timer and begin counting
from 0 seconds again.
❿ [Cancel] button
Closes the dialog box without applying setting changes.
7. Menu bar
20 | Yamaha LAN Monitor for Mac User Guide