User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
12. Update the firmware
LAN Monitor allows you to update the firmware in the following two ways.
• Update the firmware one by one from the “Device Settings” dialog.
• From the “Firmware Update” tab on the list screen, select “Update firmware on multiple units at
once”.
NOTE
• Since L2MS is used for firmware updates, it is easy to update the firmware
even without an IP address configured.
• For devices that do not support firmware update from LAN Monitor, you can
use the Web GUI to update the firmware.
12.1. Update the firmware one by one
To update the firmware, follow the steps below.
1. Use one of the following methods to display the “Device Settings” dialog for the device that
supports firmware update.
◦ “Device Settings” button on the Map screen
◦ “L2MS Agent List” tab on the List screen - “Setting” button
12. Update the firmware
Yamaha LAN Monitor for Win User Guide | 53