User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
14. Resources
14.1. Port icons in the “Device Details” view
You can check the status of each port by checking the icon color and shape of each device port shown
in the “Device Details” view.
In the “Device Details” view, switch between the [Port Status] tab, the [Bandwidth(%)] tab and the
[PoE status (Class)] tabs to show the following icons.
NOTE
• The [Bandwidth(%)] tab will only show Yamaha switches.
• The [PoE status (Class)] tab will only show Yamaha PoE switches.
14.1.1. [Port Status] tab icons
This area shows the connection status and communication speed of each port.
Icon Meaning
Port normal (10GBASE-T)
Port normal (5GBASE-T)
Port normal (2.5GBASE-T)
Port normal (1000BASE-T)
Port normal (100BASE-TX)
Port normal (10BASE-T)
Port abnormality occurred
Link down
SFP port normal (10GBASE-LX/SX)
SFP port normal (1000BASE-LX/SX)
or
stack link established
SFP port abnormality occurred
SFP port alert state
Enable/disable status of 2.4 GHz / 5 GHz wireless
14. Resources
Yamaha LAN Monitor for Win User Guide | 67