User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
Import/Export the CONFIG
Yamaha LAN Monitor for Win User Guide
48
5. Select one of the following three methods to specify the CONFIG to be imported.
6. Press the “Browse” button according to how you want to specify the CONFIG file, and select
the CONFIG file or directory.
How to specify the CONFIG to
be imported
Descriptions
Specify the CONFIG file to be
imported to each device
Selects individual CONFIG files to import.
Send one CONFIG file to all
specified devices
Sends a single CONFIG file to all selected devices.
Used to prepare multiple devices with the same settings.
This item cannot be selected when multiple models are selected.
Search the specified directory
and import the CONFIG
corresponding to the MAC
address of the device
Automatically detects/imports CONFIG files in the specified directory.
A CONFIG with the file name corresponding to the MAC address of the device
(<underscore-delimited MAC address>.conf) must be prepared in the specified
directory.
For example, the file name for a device whose MAC address is AC:44:F2:12:34:56
should be ac_44_f2_12_34_56.conf.