User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Mac
5. Network settings on the computer
Configure network settings for your computer.
1. Connect the computer to a network device.
2. Open “System Preferences” of macOS.
3.
Click the [Setup] menu on the menu bar → [Open IP Settings for PC].
The “Network Connections” window appears.
4. From the list of network adapters, select the wired LAN adapter that you want to use with LAN
Monitor.
5. Set the IP address according to your network environment.
Important
Note that the detection of Dante-enabled devices may not function if multiple
network adaptors have been “Connected”. Also, in macOS10.15.x or later, do
not turn off Wi-Fi.
If Wi-Fi is off, Yamaha LAN Monitor cannot detect the network adapter.
5. Network settings on the computer
14 | Yamaha LAN Monitor for Mac User Guide