User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Mac
7. Menu bar
This section provides descriptions of each menu on the menu bar: [File], [Setup] and [Help].
❶ [LANMonitor] menu
❷ [File] menu
❸ [Setup] menu
❹ [Help] menu
7.1. [LANMonitor] menu
7.1.1. [About LANMonitor]
Displays Yamaha LAN Monitor version and copyright information.
7.2. [File] menu
7.2.1. [New]
Initializes the current snapshot held by Yamaha LAN Monitor.
If a snapshot is already held, a confirm initialization message appears. Click [Yes] to initialize the
current snapshot.
7.2.2. [Open Snapshot File]
Displays the “Open Snapshot File” dialog box.
In the “Open Snapshot File” dialog box, select a snapshot file saved to the computer or external
memory device, then click [Open] to replace the snapshot currently held by Yamaha LAN Monitor with
the selected snapshot.
At the same time, Yamaha LAN Monitor will compare the current network status with the snapshot
and display the comparison results on the Map screen.
7. Menu bar
Yamaha LAN Monitor for Mac User Guide | 17