User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
❺ [Device Settings] button
This shows the “Device Settings” dialog box.
For details, refer to “Device Settings” dialog.
❻ [Web GUI] button (shown only for an agent device with a Web GUI)
When you click this, the Web GUI of the device currently selected in the tree appears in the
default browser.
In the Web GUI, you can configure settings for Yamaha switch and Yamaha wireless LAN access
point and manage them.
For details, refer to “Logging in to the Web GUI”.
❼ Button to show/hide device details
Click the button to switch whether device details are shown or hidden.
For Dante-enabled devices, the switch button is not shown.
❽ Button to switch Stack ID (shown only for an agent device with stack function enabled)
When you click this, the port information of the device with the selected stack ID is displayed.
9.2. Tree view
This area shows the Yamaha switch, and Dante-enabled devices detected by Yamaha LAN Monitor. The
device name and the number of connected devices (agent devices only) are shown at the right of the
icon; when you click the open/close button [>] located at the left of the icon, the devices connected
below that agent device are shown.
NOTE
This will not function until a Yamaha switch is found.
9. Map screen
Yamaha LAN Monitor for Win User Guide | 35