User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
11.1.2. For the SWX2110/SWX2110P/SWX2200 series Yamaha switch
Use this to view or change the settings.
The tabs shown at the top of the dialog allow you to switch between information displays.
• [Switch settings] tab: View or configure the settings of the Yamaha switch.
• [Port settings] tab: Configure basic functions, VLAN, and other settings for each port.
Switch settings
Of the following items, only the setting items marked with ✓ are displayed.
Items
SWX2110/
SWX2110P
series
SWX2200
series
Descriptions
Device name ✓ ✓
Changes the device name.
Click the [Settings] button to display the
“Device name” dialog box.
Label ✓ ✓ Allows you to enter a label that distinguishes
the individual device.
Click the [Settings] button to display the
“Label” dialog box.
Comment ✓ ✓
Allows you to enter a comment.
Click the [Settings] button to display the
“Comment” dialog box.
Snapshot ✓ ✓ Cannot be changed. This is fixed to “On.”
Power
conservation
✕ ✓
Configures the power conservation settings.
Click the [Settings] button to display the
“Power conservation” dialog box.
LED mode ✓ ✕
Configures the LED mode settings.
Click the [Settings] button to display the “LED
mode” dialog box.
EEE ✓ ✕
Configures the EEE settings.
Click the [Settings] button to display the
“EEE” dialog box.
11. Configuring the device
Yamaha LAN Monitor for Win User Guide | 49