User Manual

Settings
28 SWR2310-28GT SWR2310-18GT SWR2310-10G
Here we explain the procedure for logging in to this unit using the Web GUI.
You will use Yamaha LAN Monitor to log in to the Web GUI, so install Yamaha LAN Monitor
before you continue.
Before you log in, connect your computer to the same network.
For details on supported web browsers, refer to the Yamaha website.
https://www.yamahaproaudio.com/
° Logging in to this unit using a web browser
1. Start Yamaha LAN Monitor.
2. Select the device for which you want to make settings, and click the
“Web GUI” button in the “Device Details” view.
When access is successful, a dialog box appears where you can enter a user name and
password.
3. Enter the user name and password. Then click the “Login” button.
If settings are set to factory settings, enter “admin” as the initial administrative user and
“admin” as the password.
If settings are set to factory settings, a language selection screen is displayed after
successfully logging in.
Notice
If an incorrect user name or password is entered three consecutive times, logging in to the
product is disabled for one minute thereafter. If that occurs, wait at least one minute before
trying again from step 3.
4. Select the language to use.
If factory settings are specified, a screen for changing the password is displayed after login.
Notice
The user language can also be changed via the Web GUI after login.
5. Enter the new password in both fields and then click the “Save” button.
If the password was successfully changed, the top screen of the Web GUI is displayed.
Make settings using the Web GUI