User Manual

English
Settings
SWR2310-28GT SWR2310-18GT SWR2310-10G
31
Before changing the initial password for the initial administrative user name:
When the password is successfully authenticated, the system will wait for a new password to
be entered.
Skip to step 6 and change the password.
After changing the initial password for the initial administrative user name:
After the password is successfully authenticated, the command prompt appears to enable
entering commands. That completes the login process. (The remaining steps are not
necessary.)
6. Enter the new password and press the <Enter> key.
The system will wait for the new password to be re-entered.
7. Re-enter the same password as in step 6 and press the <Enter> key.
If the password is successfully changed, the command prompt will appear and entering
commands is enabled.
For details on the commands, refer to the command reference.
SWR2310-10G Rev.2.04.11 (Fri Jul 15 09:38:27 2022)
Copyright (c) 2022 Yamaha Corporation. All Rights Reserved.
Please change the default password for admin.
New Password:
SWR2310>
New Password:
New Password(Confirm):
Saving ...
Succeeded to write configuration
SWR2310>