User Manual

English
Initialization
SWR2310-28GT SWR2310-18GT SWR2310-10G
37
° Using the cold start command to restore the factory settings
You can return the unit to its factory settings by using a command line setting via the
CONSOLE port, Telnet, or an SSH client.
Notice
This step cannot be executed if the initial administrative password is specified. Use the
“enable password” command to change the administrative password in advance.
Here we assume that you are logged in as described in “Logging in from a computer
connected to the CONSOLE port” (page 30).
1. Enter enable, and press the <Enter> key.
You are now in privileged EXEC mode.
2. Enter the cold start command, and press the <Enter> key.
You will be asked to enter the administrative password.
3. Enter the administrative password and press the <Enter> key.
The unit returns to the factory-set state, and then restarts.
SWR2310>enable
SWR2310#
SWR2310#cold start
Password: