User Manual

English
SWR2310-28GT SWR2310-18GT SWR2310-10G 7
NOTICE
To avoid the possibility of malfunction/ damage
to the product, damage to data, or damage to
other property, follow the notices below.
Handling and maintenance
• Do not touch the interior of a port with your
fingers or any metallic object. Doing so
might cause malfunctions.
• Do not use the product in a location
exposed to direct sunlight (such as in a car
during the day), in a location of extreme
heat such as near a stove, in a location of
extreme cold, or in a location of excessive
dust or vibration. Failure to observe this
precaution could cause the product’s
panel to deform, its interior components to
malfunction, or its operation to become
unstable.
• Do not place vinyl, plastic or rubber
objects on the product, since this might
cause alteration or discoloration of the
panel.
• When cleaning the product, use a dry and
soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-
impregnated wiping cloths, since this might
cause alteration or discoloration.
• Condensation can occur in the product due
to rapid, drastic changes in ambient
temperature—when the product is moved
from one location to another, or air
conditioning is turned on or off, for example.
Using the product while condensation is
present can cause damage. If there is
reason to believe that condensation might
have occurred, leave the product for several
hours without turning on the power until the
condensation has completely dried out.
• Drain all static electricity from your
clothing and body before handling this
product. Static electricity can damage this
product. Touch an exposed metal part of
the host device or other grounded object
beforehand.
• Do not install the product in a location
where magnetic fields are strong.
Otherwise, it might cause the product to
malfunction.
• Do not connect any noise generating
devices on the same power line as the
product. Failure to observe this precaution
could result in a malfunction or damage to
the product.
• Do not locate any connected LAN cables
close to the power cord. Otherwise, high
voltage might be induced, resulting in
malfunction.
• A 1000BASE-T connection will require an
Enhanced Category 5 (CAT5e) or better
LAN cable.
• Do not install any SFP module other than
the separately sold SFP-SWRG-SX or
SFP-SWRG-LX in an SFP port. Operation
cannot be guaranteed if any SFP module
other than the above is installed.
• Do not install any SFP+ module other than
the separately sold SFP-SWRT-SR or
SFP-SWRT-LR, any SFP module other
than the SFP-SWRG-LX or
SFP-SWRG-SX, or any direct attach cable
other than the DAC-SWRT-3M or
DAC-SWRT-1M in an SFP+ port.
Operation cannot be guaranteed if any
module or cable other than the above is
installed.
• Attach the dust cover to SFP/SFP+ ports
that are not in use. Failing to do so could
allow foreign objects to enter, causing
malfunctions. Keep the dust cover in a
safe place so that it is not lost.
• The rubber feet included in this package
can be attached to the product to prevent
slippage when it is to be used on a
slippery surface.
• Do not connect this product to public Wi-Fi
and/or Internet directly. Only connect this
product to the Internet through a router
with strong password-protections. Consult
your router manufacturer for information
on security best practices.