User Manual

Yamaha Network USB Serial Driver Installation Guide
2
Follow the steps below to install the software.
NOTE
• You are only permitted to use this software pursuant to the terms and conditions of the “License Agreement” shown during the installation.
• If the same software components have already been installed in your computer, you can use the same procedure as described in the Installation
instructions here to update the software.
For information on the OS requirements for the software and download, refer to the following website.
http://www.yamaha.com/proaudio/
Preparation
If the following warning messages appear during the installation,
click [Yes] or [Install].
Installation
1
Turn off the computer.
2 Disconnect all USB devices other than the
mouse and keyboard from the computer.
3 Start the computer and log on to the
Administrator account.
Exit any open applications and close all open windows.
4 Double-click “Setup.exe” in the compressed file
(you have downloaded).
5 Follow the on-screen instructions to install the
software.
6 When installation has been completed, click
[Finish].
If a window requiring you to restart your computer
appears, follow the on-screen instructions and restart the
computer.
Device Connection
7
Connect the device directly to the computer by
using the USB cable.
8 Turn on the device (if device is turned off).
When the notify area shows a message such as “Installing
device driver software” or “Setting up a device,” wait for a
while, keeping the USB cable connected. Setup is
complete when a message such as “Your device is ready to
use” or “Device setup completes” is shown.
Confirmation of Installation
9
Open the “Device Manager” window as follows.
Windows 7/8.1/10
[Control Panel]  ([Hardware and Sound])  [Device
Manager]
Windows 10
Right click [Start]  [Device Manager]
10 Click on the [>] mark next to “Universal Serial
Bus controllers.”
11 Confirm that the “Yamaha USB Serial” and
“Yamaha USB Serial Composite Device” are
listed.
Installation of the software is now complete.
Yamaha Network USB Serial Driver Installation