User Manual

vlan-port-mode 1 hybrid
vlan-port-mode 23 hybrid
vlan-trunk 1 2 join
vlan-trunk 1 3 join
vlan-trunk 23 2 join
vlan-trunk 23 3 join
loopdetect-count 5
loopdetect-linkdown linkdown-recovery
loopdetect-recovery-timer 600
loopdetect-port-use 7 off
Show the config information of the L2MS slave terminal whose MAC address is 00a0.de00.0001.
SWR2310>show l2ms slave-config 00a0.de00.0001
[00a0.de00.0001]
system-name TEST2_SWX2200-8G
vlan-id 2 2
vlan-id 3 3
vlan-port-mode 1 hybrid
vlan-port-mode 8 hybrid
vlan-trunk 1 2 join
vlan-trunk 1 3 join
vlan-trunk 8 2 join
vlan-trunk 8 3 join
Show the config information of the L2MS slave terminal whose route is 1.23-1.23-8.
SWR2310>show l2ms slave-config port1.23-1.23-8
[port1.23-1.23-8]
system-name TEST3_SWX2200-8G
vlan-id 2 2
vlan-id 3 3
vlan-port-mode 1 hybrid
vlan-access 5 2
vlan-access 6 3
vlan-trunk 1 2 join
vlan-trunk 1 3 join
4.21.12 Set the device information acquisition time interval for downstream of a wireless AP
[Syntax]
wireless-terminal-watch interval time
no wireless-terminal-watch interval
[Parameter]
time : <10-86400>
Acquisition interval (seconds)
[Initial value]
wireless-terminal-watch interval 60
[Input mode]
L2MS mode
[Description]
Specifies the time interval at which device information for a device downstream of a wireless AP is acquired. Information for
the devices existing downstream the wireless AP is acquired when the time specified by time has elapsed.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
If device watch is not operating, device information is not acquired, regardless of the setting of this function.
[Example]
Set the device information acquisition time interval to 3,600 seconds.
SWR2310(config)#l2ms configuration
SWR2310(config-l2ms)#l2ms enable
SWR2310(config-l2ms)#l2ms role master
Command Reference | Maintenance and operation functions | 111