User Manual

4.22.2 Set whether to include terminals in the snapshot comparison
[Syntax]
snapshot trap terminal [except-wireless]
no snapshot trap terminal
[Keyword]
except-wireless : Information for wirelessly connected terminals is excluded from the snapshot comparison.
[Initial value]
no snapshot trap terminal
[Input mode]
global configuration mode
[Description]
Terminal information is included in the snapshot comparison.
If the except-wireless option is specified, information for terminals that are wirelessly connected below a wireless access point
are excluded from the snapshot comparison.
If this command is executed with the "no" syntax, terminal information is excluded from the snapshot comparison.
[Note]
This command is valid only when operating as the master and the terminal-watch enable command and snapshot enable
command have also been set.
[Example]
Include terminal information in the snapshot comparison.
SWR2310(config)#snapshot trap terminal
4.22.3 Create snapshot
[Syntax]
snapshot save [after-update]
[Keyword]
after-update : After updating the network's connection state, save it as a snapshot
[Input mode]
privileged EXEC mode
[Description]
Saves a snapshot file that is the base for the LAN map's snapshot function.
If the after-update option is not included, the network connection state currently maintained by the master is saved as the
snapshot file.
If the after-update option is included, the network connection state information is updated to the latest information, and then
saved as the snapshot file.
[Note]
If the after-update option is included, the network connection state information is updated to the latest information, but
depending on the configuration of the network, it might take some time for this update to be completed.
[Example]
After updating the network's connection state, save the snapshot file.
SWR2310#snapshot save after-update
4.22.4 Delete snapshot
[Syntax]
snapshot delete
[Input mode]
privileged EXEC mode
114 | Command Reference | Maintenance and operation functions