User Manual

Current Revision: Rev.2.04.01
New Revision: Rev.2.04.03
Downloading...
Update to this firmware? (Y/N)y
Updating...
Finish
SWR2310#
4.23.3 Set firmware download timeout duration
[Syntax]
firmware-update timeout time
no firmware-update timeout
[Parameter]
time : <100-86400>
Timeout time (seconds)
[Initial value]
firmware-update timeout 300
[Input mode]
global configuration mode
[Description]
Specifies the timeout duration when downloading firmware from a web server.
If this command is executed with the "no" syntax, the setting returns to the default.
[Example]
Set the firmware download timeout duration to 120 seconds.
SWR2310(config)#firmware-update timeout 120
SWR2310(config)#
4.23.4 Allow revision-down
[Syntax]
firmware-update revision-down enable
no firmware-update revision-down
[Initial value]
no firmware-update revision-down
[Input mode]
global configuration mode
[Description]
When using a firmware file from a web server to update the firmware, this allows the firmware to be changed to a revision that
is older than the current revision.
If this is executed with the "no" syntax, revision-down is not allowed.
[Example]
Allow revision-down.
SWR2310(config)#firmware-update revision-down enable
SWR2310(config)#
4.23.5 Show firmware update function settings
[Syntax]
show firmware-update
[Input mode]
privileged EXEC mode
[Description]
Shows the current settings of the firmware update function.
The following items are shown.
116 | Command Reference | Maintenance and operation functions