User Manual

4.24.3 Show stack information
[Syntax]
show stack
[Input mode]
unprivileged EXEC mode, privileged EXEC mode
[Description]
Shows stack-related settings and status information.
The following content is shown.
• Set stack function (Stack)
• The unit's own stack ID [set value] (Configured ID)
• The unit's own stack ID [operating value] (Running ID)
• The unit's own status (Status)
• Range of IP addresses used by the unit's own stack port (Subnet on stack port)
• MAC Address during stacking(Virtual MAC-Address)
• Information for each stack member
• Stack ID [operating value] (ID)
• Model name (Model)
• Status (Status)
• Role (Role)
• Serial Number(Serial)
• Physical Address(MAC-Address)
• Information for each stack port
• Interface Number (Interface)
• Status (Status)
[Note]
This command can be executed only for models that support stacking.
[Example]
Show stack information.
SWR2310#show stack
Stack: Enable
Configured ID : 1
Running ID : 1
Status : Active
Subnet on stack port : Auto-ip
Virtual MAC-Address : 00a0.de00.0000
ID Model Status Role Serial MAC-Address
------------------------------------------------------------------------
1 SWR2310-28GT Active Master S000000000 00a0.de00.0000
2 SWR2310-28GT Active Slave S000000000 00a0.de00.0000
Interface Status
------------------------------------------------------------------------
port1.27 up
port1.28 up
port2.27 up
port2.28 up
4.24.4 Set range of IP addresses used by the stack port
[Syntax]
stack subnet NETWORK_ADDR
stack subnet auto-ip
no stack subnet
[Parameter]
NETWORK_ADD
R
: A.B.C.D
120 | Command Reference | Maintenance and operation functions