User Manual

[Description]
Shows the LED mode setting and status.
The following items are shown.
• Default LED mode setting
• Current LED mode status
[Example]
Show the LED mode setting and status.
SWR2310>show led-mode
default mode : off
current mode : link-act
4.25.8 Show port error LED status
[Syntax]
show error port-led
[Input mode]
unprivileged EXEC mode, privileged EXEC mode
[Description]
Shows the ID of ports that are generating an error, and the following error causes.
Item Description
loop-detected (blocking) Detected a loop, and are currently blocking
loop-detected (shutdown) Detected a loop, and are currently shutdown
sfp rx-power error (low) SFP optical reception level is below the normal range
sfp rx-power error (high) SFP optical reception level is above the normal range
poe error (port limit) Power supply stopped because of PoE port limit
poe error (system limit) Power supply stopped because of PoE system limit
poe error (PD error) Power supply stopped because PD error detected
[Example]
Show the port error status.
SWR2310>show error port-led
ID error
-----------------------------------------
port1.1 poe error (PD error)
port1.2 loop-detected (blocking)
4.25.9 Backup system information
[Syntax]
backup system
[Input mode]
privileged EXEC mode
[Description]
Copy the following settings from the unit to the SD card.
• Startup configurations #0 - #1 and information that pertains to them
• startup-config select command values
• boot prioritize sd command values
If the SD card's "/swr2310/firmware" folder contains "swr2310.bin", copy it to the backup folder.
This can be executed only if the SD card is mounted.
[Note]
Do not edit or delete the files that are backed up to the SD card.
[Example]
Execute a system information backup.
124 | Command Reference | Maintenance and operation functions