User Manual

SWR2310#backup system
Succeeded to backup system files and firmware file.
4.25.10 Restore system information
[Syntax]
restore system
[Input mode]
privileged EXEC mode
[Description]
System information previously backed up to SD card is restored to the unit.
If a firmware file exists in the backup folder of the SD card, the firmware will also be updated using that file.
After restore, restart will occur.
This can be executed only if the SD card is mounted.
[Note]
This command cannot be used if the stack function is enabled.
[Example]
Restore system information into the unit.
SWR2310# restore system
restore and reboot system? (y/n) y
Update the firmware.
Current Revision: Rev.2.04.04
New Revision: Rev.2.04.04
Update to this firmware? (Y/N) Y
Unmounted the SD card. Pull out the SD card.
Updating...
Finish
Succeeded to restore system files.
SWR2310#
Command Reference | Maintenance and operation functions | 125