User Manual

port1.27 40.7 95.0 90.0 -20.0 -25.0
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
Voltage High Alarm High Warning Low Warning Low Alarm
Interface (V) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 3.37 3.62 3.46 3.13 2.97
port1.26 - - - - -
port1.27 3.34 3.89 3.70 2.89 2.70
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
Current High Alarm High Warning Low Warning Low Alarm
Interface (mA) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 4.0 16.0 15.0 2.0 2.0
port1.26 - - - - -
port1.27 6.2 17.0 14.0 2.0 1.0
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
TX-Power High Alarm High Warning Low Warning Low Alarm
Interface (dBm) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 -5.4806 0.4139 0.0000 -10.7058 -12.2184
port1.26 - - - - -
port1.27 -5.4714 -1.9997 -1.9997 -11.0237 -11.7392
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
RX-Power High Alarm High Warning Low Warning Low Alarm
Interface (dBm) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 -7.5696 2.5527 0.0000 -16.9897 -40.0000
port1.26 - - - - -
port1.27 -8.7614 1.0002 -1.0017 -18.0134 -20.0000
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
5.1.16 Set SFP module optical reception level monitoring
[Syntax]
sfp-monitor rx-power action
no sfp-monitor rx-power
[Parameter]
action : Operations for SFP module optical reception level monitoring
Setting value Description
enable
Enables SFP module optical reception level
monitoring
disable
Disables SFP module optical reception level
monitoring
[Initial value]
sfp-monitor rx-power enable
[Input mode]
global configuration mode
[Description]
Sets the monitoring of SFP module optical reception levels.
[Example]
Disable SFP module optical reception level monitoring.
SWR2310(config)#sfp-monitor rx-power disable
5.2 Link aggregation
138 | Command Reference | Interface control