User Manual

Item Description
Aggregator ID Distinguishing ID on LACP
Information shows the following items.
Item Description
LAG LACP system ID (priority, MAC address)
Admin Key ID that is the basis of the LACP key (logical port number)
Port priority LACP port priority order
Ifindex Interface number
Timeout Timeout value ("Long"=90 seconds, "Short"=3 seconds)
Active LACP operation mode("Active", "Passive")
Synchronized Synchronization flag
Collecting Collecting flag
Distributing Distributing flag
Defaulted Defaulted flag
Expired Expired flag
[Example]
Shows the status of LACP logical interface.
SWR2310#show etherchannel
% Lacp Aggregator: po10
% Load balancing: src-dst-mac
% Member:
port1.1
port1.2
port1.3
port1.4
Shows the status of the LAN/SFP ports that make up the LACP logical interface.
SWR2310#show etherchannel port1.1
Etherchannel port1.1
Physical admin key 3
Receive machine state Current
Periodic Transmission machine state Slow periodic
Mux machine state Collecting/Distributing
Selection Selected
Information Actor Partner
LAG 0x8000, 00-a0-de-e0-e0-e0 0x8000, 00-a0-de-11-11-11
Admin Key 0001 0001
Port Priority 32768 32768
Ifindex 5001 5001
Timeout Long Long
Active 1 1
Synchronized 1 1
Collecting 1 1
Distributing 1 1
Defaulted 0 0
Expired 0 0
5.2.5 Set LACP system priority order
[Syntax]
lacp system-priority priority
no lacp system-priority
[Parameter]
priority : <1-65535>
142 | Command Reference | Interface control