User Manual

If this command is executed with the "no" syntax, disables MAC authentication for the entire system.
Use a RADIUS server for authentication on which the radius-server host command has been configured.
[Note]
In order to actually use MAC authentication, you need to enable MAC authentication on the applicable interface as well. (auth-
mac enable command)
[Example]
Enable MAC authentication for the entire system.
SWR2310(config)#aaa authentication auth-mac
5.3.3 Configuring the Web authentication function for the entire system
[Syntax]
aaa authentication auth-web
no aaa authentication auth-web
[Initial value]
no aaa authentication auth-web
[Input mode]
global configuration mode
[Description]
Enables Web authentication for the entire system.
If this command is executed with the "no" syntax, Disables Web authentication for the entire system.
Use a RADIUS server for authentication on which the radius-server host command has been configured.
[Note]
In order to actually use Web authentication, you need to enable Web authentication on the applicable interface as well. (auth-
web enable command)
[Example]
Enable Web authentication for the entire system.
SWR2310(config)#aaa authentication auth-web
5.3.4 Set operation mode for the IEEE 802.1X authentication function
[Syntax]
dot1x port-control mode
no dot1x port-control
[Parameter]
mode : Operation mode for IEEE 802.1X authentication
Operation mode Description
auto
Operates as an authenticator for IEEE 802.1X
authentication
force-authorized
Sets the authenticated port for IEEE 802.1X
authentication to a fixed port
force-unauthorized
Sets the unauthenticated port for IEEE 802.1X
authentication to a fixed port
[Initial value]
no dot1x port-control
[Input mode]
interface mode
[Description]
Configures the IEEE 802.1X authentication operation mode for the applicable interface.
If this command is executed with the "no" syntax, the IEEE 802.1X authentication function will be disabled for the applicable
interface.
Command Reference | Interface control | 149