User Manual

[Description]
Deletes the file for customizing the Web authentication screen.
[Note]
In a state in which the SD card is not mounted, executing this command on a config that is in the SD card produces an error.
[Example]
Deletes logo.png from startup configuration #0.
SWR2310#erase auth-web startup-config logo.png 0
5.3.35 Set EAP pass through
[Syntax]
pass-through eap switch
no pass-through eap
[Parameter]
switch : Behavior EAP pass through
Setting value Description
enable Enable the EAP pass through
disable Disable the EAP pass through
[Initial value]
pass-through eap enable
[Input mode]
global configuration mode
[Description]
Enables/disables EAP pass-through, specifying whether EAPOL frames are forwarded.
If "disable" is specified, EAP frames are discarded.
If this is executed with the "no" syntax, or if "enable" is specified, EAPOL frames are forwarded.
[Note]
For interfaces on which 802.1X authentication is enabled, authentication functionality is given priority, and EAP pass-through
settings are not applied.
[Example]
Disable the EAP pass through.
SWR2310(config)#pass-through eap disable
5.4 Port security
5.4.1 Set port security function
[Syntax]
port-security enable
port-security disable
no port-security
[Keyword]
enable : Enables port security function
disable : Disables port security function
[Initial value]
port-security disable
[Input mode]
interface mode
166 | Command Reference | Interface control