User Manual

[Parameter]
config_num : Configuration number
Setting value Description
<0-1> Startup configuration #0-#1
sd Startup config in SD card
[Input mode]
privileged EXEC mode, individual configuration mode
[Description]
Saves the current operating settings (running configuration) as the settings for startup (startup configuration).
If config_num is omitted, it is saved in the startup config that was used for the current startup.
[Note]
The running configuration can also be saved by executing the copy running-config startup-config command.
In a state in which the SD card is not mounted, executing this command on a config that is in the SD card produces an error.
When stack is enabled, this can be executed only on the master switch (Active status).
[Example]
Save the running configuration.
SWR2310#write
Succeeded to write configuration.
SWR2310#
4.3.3 Show the running configuration
[Syntax]
show running-config [section]
[Parameter]
section : Section to be shown
Setting value Description
access-list Access list related
http-server HTTP server related
interface Interface related
ip IP related
ipv6 IPv6 related
key Authentication key related
l2ms L2MS related
lldp LLDP related
mail E-mail notification-related
radius-server RADIUS server related
snmp SNMP related
spanning-tree STP related
ssh-server SSH server related
telnet-sever TELNET server related
[Input mode]
privileged EXEC mode, individual configuration mode
Command Reference | Maintenance and operation functions | 33