User Manual

[Description]
Copy the startup settings (startup config) and the information associated with them.
[Note]
In a state in which the SD card is not mounted, executing this command on a config that is in the SD card produces an error.
[Example]
Copy startup config #0 to startup config #1.
SWR2310#copy startup-config 0 1
Succeeded to copy configuration
SWR2310#
4.3.7 Select startup config
[Syntax]
startup-config select config_num
no startup-config select
[Parameter]
config_num : Configuration number
Setting Description
<0-1> Startup config #0-#1
sd Startup config on the SD card
[Initial value]
startup-config select sd
[Input mode]
privileged EXEC mode
[Description]
Select the settings to use at startup (startup config), and restart.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
At startup, if "sd" is specified as config_num and an SD card on which a startup config is saved is not inserted, startup config #0
is selected.
This command cannot be used if the stack function is enabled.
[Example]
Select startup config #1 and restart.
SWR2310#startup-config select 1
reboot system? (y/n): y
4.3.8 Set description for startup config
[Syntax]
startup-config description config_num line
no startup-config description config_num
[Parameter]
config_num : <0-1>
Configuration number
line : Single-byte alphanumeric characters and single-byte symbols (63 characters or less)
Description for applicable startup config
[Input mode]
privileged EXEC mode
36 | Command Reference | Maintenance and operation functions