User Manual

[Description]
Specify a description for the applicable startup config.
If this command is executed with the "no" syntax, the description is deleted.
The description is shown at the beginning of the execution result of the show startup-config command.
[Example]
Specify a description for startup config #1.
SWR2310#startup-config description 1 TEST_CONFIG_1
4.4 Manage boot information
4.4.1 Show boot information
[Syntax]
show boot num
show boot all
show boot list
[Keyword]
all : Shows up to five entries of the boot information history
list : Shows a simplified version of up to five entries of the boot information history
[Parameter]
num : <0-4>
Shows the boot history entry of the specified number
[Input mode]
unprivileged EXEC mode, privileged EXEC mode
[Description]
Show the boot information.
[Note]
This history is cleared when you execute the cold start command or the clear boot list command.
[Example]
Show the current boot information.
SWR2310>show boot
Running EXEC: SWR2310 Rev.2.04.01 (Thu Sep 26 17:35:20 2019)
Previous EXEC: SWR2310 Rev.2.04.01 (Thu Sep 26 17:35:20 2019)
Restart by reload command
Shows a list of the boot history.
SWR2310>show boot list
No. Date Time Info
--- ---------- -------- -------------------------------------------------
0 2018/03/15 09:50:29 Restart by reload command
1 2018/03/14 20:24:40 Power-on boot
--- ---------- -------- -------------------------------------------------
4.4.2 Clear boot information
[Syntax]
clear boot list
[Input mode]
privileged EXEC mode
[Description]
Clears the boot information history.
[Example]
Clear the boot information.
Command Reference | Maintenance and operation functions | 37