User Manual

Configuring the device
Yamaha LAN Monitor for Mac User Guide
36
Configuring the device
With Yamaha LAN Monitor, you can configure some of the functions for Yamaha switches and Yamaha wireless LAN
access points.
There are the following three methods for setting the device.
“Device Settings” dialog
The “Device Settings” dialog can be displayed in the following two ways.
Either way, the same dialog will be displayed.
• Map screen - “Device Details” view - “Device Settings” button
• List screen - “Switch / Wireless AP List” tab - “Setting” button
The setting items displayed in the dialog vary from model to model.
 For non-SWX2110/SWX2110P series Yamaha switch and Yamaha wireless LAN access point
Basic items such as label settings, device name settings, and IP address settings can be configured.
Only items that are supported by the device will be displayed.
Setting method Descriptions
“Device Settings” dialog
(page 36)
You can set basic items such as IP address and device name.
For models without a Web GUI, a detailed setting dialog will be displayed.
Web GUI (page 39)
Using the device's Web GUI, detailed settings for each function can be made.
To access the Web GUI of the device, the IP address must be set appropriately in the
“Device Settings” dialog, and IP communication must be maintained between the PC
running Yamaha LAN Monitor and the device to be operated.
CONFIG import (page 34)
By importing a backup or pre-prepared CONFIG, you can apply the settings for each
function all at once.