User Manual

SWR2310#show ddm status
Temperature High Alarm High Warning Low Warning Low Alarm
Interface (Celsius) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 42.7 100.0 85.0 -40.0 -55.0
port1.26 - - - - -
port1.27 40.7 95.0 90.0 -20.0 -25.0
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
Voltage High Alarm High Warning Low Warning Low Alarm
Interface (V) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 3.37 3.62 3.46 3.13 2.97
port1.26 - - - - -
port1.27 3.34 3.89 3.70 2.89 2.70
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
Current High Alarm High Warning Low Warning Low Alarm
Interface (mA) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 4.0 16.0 15.0 2.0 2.0
port1.26 - - - - -
port1.27 6.2 17.0 14.0 2.0 1.0
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
TX-Power High Alarm High Warning Low Warning Low Alarm
Interface (dBm) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 -5.4806 0.4139 0.0000 -10.7058 -12.2184
port1.26 - - - - -
port1.27 -5.4714 -1.9997 -1.9997 -11.0237 -11.7392
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
RX-Power High Alarm High Warning Low Warning Low Alarm
Interface (dBm) Threshold Threshold Threshold Threshold
------------ ------------ ------------ ------------ ------------ ------------
port1.25 -7.5696 2.5527 0.0000 -16.9897 -40.0000
port1.26 - - - - -
port1.27 -8.7614 1.0002 -1.0017 -18.0134 -20.0000
port1.28 Unsupported Unsupported Unsupported Unsupported Unsupported
5.1.16 SFP モジュールの受光レベル監視の設定
[書式]
sfp-monitor rx-power action
no sfp-monitor rx-power
[パラメーター]
action :
SFP モジュールの受光レベル監視の動作
設定値 説明
enable
SFP モジュールの受光レベル監視を有効に
する
disable
SFP モジュールの受光レベル監視を無効に
する
[初期設定]
sfp-monitor rx-power enable
[入力モード]
グローバルコンフィグレーションモード
[説明]
SFP モジュールの受光レベル監視を設定する。
[設定例]
SFP モジュールの受光レベル監視を無効にする。
142 | コマンドリファレンス | インターフェース制御