User Manual

English
Controls and Connectors
SWR2310-28GT SWR2310-18GT SWR2310-10G
13
2
mini-USB CONSOLE port
This is a mini-USB port for making settings. Use a USB cable to connect it to the USB port
of a computer. Use a USB cable equipped with a USB Type A connector and a USB mini-
B (5-pin) connector.
Memo
Use a cable that supports data transfer. Charge-only cables cannot be used.
3 RJ-45 CONSOLE port
This is an RJ-45 port for making settings. Use an RJ-45/DB-9 console cable to connect it
to the RS-232C connector (COM port) of the computer.
4 microSD indicator
Indicates the connection and usage status of the microSD card.
Caution
Do not remove the microSD card if this indicator is flashing green.
5 microSD slot
A microSD card can be inserted in this slot.
6 LAN ports
These ports support T10BASE-T, 100BASE-TX, and 1000BASE-T.
7 SFP+ ports /
These ports support T10GBASE-SR, 10GBASE-LR, 1000BASE-SX, and 1000BASE-LX.
Install an SFP+ module or SFP module sold separately by Yamaha. For the SWR2310-
28GT or SWR2310-18GT, install a direct attach cable (DAC-SWRT-3M or DAC-SWRT-1M).
For details on installing an SFP+ or SFP module, refer to “Installing an SFP module”
(page 30) in “Connections.” For details on installing a direct attach cable, refer to “Installing
a direct attach cable” / (page 32). These ports can also
be used for stack connection. For details on stack connection, refer to "Making stack
connections” (page 33).
8 Stack ID indicator
This is a 7-segment display that indicates the stack ID when stack connection is used.
9 SFP ports
These ports support 1000BASE-SX and 1000BASE-LX. Install an SFP module sold
separately by Yamaha.
For details on installing an SFP module, refer to “Installing an SFP module” (page 30) in
“Connections.”
microSD indicator Status
Unlit A microSD card is not inserted in the slot.
Flashing green The microSD card is being accessed.
Lit green A microSD card is inserted.
SWR2310-28GT
SWR2310-18GT
SWR2310-28GT
SWR2310-18GT
SWR2310-28GT
SWR2310-28GT
SWR2310-10G