User Manual

English

Settings

SWR2310-28GT SWR2310-18GT SWR2310-10G

Settings

Settings for this unit can be made in the following ways.

• Make settings using the Web GUI

• Make settings from the command line using the CONSOLE port

• Make settings from the command line using Telnet

• Make settings from the command line using SSH

This document explains “Make settings using the Web GUI” (page 27) and “Making settings

from the command line using the CONSOLE port” (page 28).

You can log in to this unit either as a standard user or as an administrative user. This

document explains how to log in as an administrative user.

For details on the commands used by this unit, refer to the command reference.

The command reference is available on the Yamaha website.

http://www.yamaha.com/proaudio/

Here we explain the procedure for logging in to this unit using the Web GUI.

You will use Yamaha LAN Monitor to log in to the Web GUI, so install Yamaha LAN Monitor

before you continue.

Before you log in, connect your computer to the same network.

For details on supported web browsers, refer to the Yamaha website.

http://www.yamaha.com/proaudio/

° Logging in to this unit using a web browser

1. Start Yamaha LAN Monitor.

2. Select the device for which you want to make settings, and click the Web

GUI button in the “Device Details” view.

When access is successful, a dialog box appears where you can enter a user name and

password.

3. If you are making settings ahead of time, enter the user name and password,

and click the “log in” button.

With the factory settings, the user name and password are not specified, so it is not

necessary to enter a user name and password.

Make settings using the Web GUI