User Manual

PSE allocated power value Power that can be supplied by PSE device (0.1 mW units)
Link Aggregation Status Link aggregation enabled/disabled
Link Aggregation Port ID ID of link aggregation port
Max Frame Size Maximum frame size
• LLDP-MED TLV information (shown if LLDP-MED TLV is received)
MED Capabilities LLDP-MED TLV type list
MED Capabilities Dev Type LLDP-MED media device type
MED Application Type Application type
MED Vlan id ID of VLAN
MED Tag/Untag VLAN tagged or untagged
MED L2 Priority L2 priority order
MED DSCP Val DSCP value priority order
MED Location Data Format Format of location data
Latitude Res Resolution of latitude (number of significant upper bits)
Latitude Latitude (34 bits)
Longitude Res Resolution of longitude (number of significant upper bits)
Longitude Longitude (34 bits)
AT Altitude type
1: meter
2: floor of building
Altitude Res Resolution of altitude (number of significant upper bits)
Altitude Altitude (30 bits)
Datum Geodetic datum
0: USA's World Geodetic System (WGS 84)
1: North American Datum (NAD 83)
2: Average historical minimum sea level of North American
Datum (NAD 83)
LCI length Length of location information data
What Place of reference location
0: Location of the DHCP server
1: Position of the network element thought to be nearest the
client
2: Location of client
Country Code Country code
CA type CA (Civic Address) type
MED Inventory Inventory information list
Refer to RFC 3825 for details on location information.
[Example]
Show LLDP information for LAN port #1.
SWR2311P#show lldp interface port1.1
Agent Mode : Nearest bridge
Enable (tx/rx) : Y/Y
Message fast transmit time : 1
Message transmission interval : 30
Command Reference | Maintenance and operation functions | 101