User Manual

[Keyword]
enable : Use the L2MS function
disable : Don't use the L2MS function
[Initial value]
l2ms enable
[Input mode]
L2MS mode
[Description]
Sets whether to use the L2MS function.
If this command is executed with the "no" syntax, the setting returns to the default.
[Example]
Use the L2MS function.
SWR2311P(config)#l2ms configuration
SWR2311P(config-l2ms)#l2ms enable
4.21.3 Set role of L2MS function
[Syntax]
l2ms role role
no l2ms role
[Parameter]
role : Role of L2MS function
Setting value Description
master
Operate as an L2MS master that sets and
controls SWR series units that are connected
subordinate to it
slave
Be managed from a Yamaha device that is
operating as an L2MS master, such as an
SWR2311P-10G unit that is set as the L2MS
master
[Initial value]
l2ms role slave
[Input mode]
L2MS mode
[Description]
Sets the role when using the L2MS function.
If this command is executed with the "no" syntax, operate as a slave.
[Note]
If the same network includes multiple Yamaha routers or firewalls on which L2MS (switch controller function) is enabled, or
multiple SWR series units that are set to be L2MS masters, the L2MS function will not operate correctly.
Ensure that a single network has only one device that is the L2MS master.
[Example]
Use the L2MS function as master.
SWR2311P(config)#l2ms configuration
SWR2311P(config-l2ms)#l2ms enable
SWR2311P(config-l2ms)#l2ms role master
4.21.4 Set L2MS slave watch interval
[Syntax]
slave-watch interval time
104 | Command Reference | Maintenance and operation functions