User Manual

4.21.10 Show L2MS information
[Syntax]
show l2ms [detail]
[Keyword]
detail : Also show detailed information
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the following information according to the L2MS operating state.
• If L2MS is operating as master
•
Number of L2MS slaves being managed
• Information for the L2MS slaves being managed
• MAC address
• Model name
• Device name
• Route
• Uplink port
• Settings applied
• If L2MS is operating as master and "detail" is specified
• L2MS master information
• Number of terminals connected to the L2MS master
• Information of terminals connected to the L2MS master
• MAC address
• Ports connected
• Time at which terminal was discovered
• Number of L2MS slaves being managed
• Information for the L2MS slaves being managed
• MAC address
• Model name
• Device name
• Route
• Linked-up ports
• Uplink port
• Downlink port
• Settings applied
• Number of terminals connected to the L2MS slave
• Information of terminals connected to the L2MS slave (in the case of a switch)
• MAC address
• Ports connected
• Time at which terminal was discovered
• Information of terminals connected to the L2MS slave (in the case of an AP)
• SSID connected
• Frequency connected
• Time at which terminal was discovered
• If L2MS is operating as slave
• Whether managed by the L2MS master
• MAC address of L2MS master (if managed)
[Note]
Information is not shown if L2MS is not operating.
Specifying "detail" is valid only if L2MS is operating as master.
[Example]
If L2Ms is operating as master, show detailed L2MS information.
SWR2311P>show l2ms detail
Role : Master
108 | Command Reference | Maintenance and operation functions