User Manual

[Master]
Number of Terminals : 0
[Slave]
Number of Slaves : 2
[ac44.f230.00a5]
Model name : SWR2311P-10G
Device name : SWR2311P-10G_Z5301050WX
Route : port2.1
LinkUp : 1, 3, 9
Uplink : 1
Downlink : 3
Config : None
Appear time : Tue Mar 13 18:43:18 2018
Number of Terminals : 1
[bcae.c5a4.7fb3]
Port : 9
Appear time : Wed Mar 14 14:01:18 2018
[00a0.deae.b8bf]
Model name : SWR2311P-10G
Device name : SWR2311P-10G_S4L000401
Route : port2.1-3
LinkUp : 1
Uplink : 1
Downlink : None
Config : None
Appear time : Tue Mar 13 18:43:18 2018
Number of Terminals : 0
4.21.11 Set the device information acquisition time interval for downstream of a wireless AP
[Syntax]
wireless-terminal-watch interval time
no wireless-terminal-watch interval
[Parameter]
time : <10-86400>
Acquisition interval (seconds)
[Initial value]
wireless-terminal-watch interval 60
[Input mode]
L2MS mode
[Description]
Specifies the time interval at which device information for a device downstream of a wireless AP is acquired. Information for
the devices existing downstream the wireless AP is acquired when the time specified by time has elapsed.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
If device watch is not operating, device information is not acquired, regardless of the setting of this function.
[Example]
Set the device information acquisition time interval to 3,600 seconds.
SWR2311P(config)#l2ms configuration
SWR2311P(config-l2ms)#l2ms enable
SWR2311P(config-l2ms)#l2ms role master
SWR2311P(config-l2ms)#terminal-watch enable
SWR2311P(config-l2ms)# wireless-terminal-watch interval 3600
4.21.12 Set event monitoring function
[Syntax]
event-watch enable
event-watch disable
Command Reference | Maintenance and operation functions | 109