User Manual

no event-watch
[Keyword]
enable : Enable the event monitoring function
disable : Disable the event monitoring function
[Initial value]
event-watch enable
[Input mode]
L2MS mode
[Description]
Sets whether to disable or enable the event monitoring function. If enabled, event information for the L2MS slaves existing on
the network is acquired at regular intervals.
If this command is executed with the "no" syntax, the event monitoring function is enabled.
[Note]
Event monitoring is performed only if L2MS is operating as master.
[Example]
Disable the event monitoring function.
SWR2311P(config)#l2ms configuration
SWR2311P(config-l2ms)#l2ms enable
SWR2311P(config-l2ms)#l2ms role master
SWR2311P(config-l2ms)#event-watch disable
4.21.13 Set event information acquisition time interval
[Syntax]
event-watch interval time
no event-watch interval
[Parameter]
time : <60-1800>
Acquisition time interval (seconds)
[Initial value]
event-watch interval 300
[Input mode]
L2MS mode
[Description]
Sets the time interval at which event information is acquired from L2MS slaves existing on the network. When the time
specified by time elapses, event information is acquired from L2MS slaves existing on the network
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
If the event monitoring function is not enabled, event information is not acquired, regardless of the setting of this command.
[Example]
Set the monitoring time interval to 60 seconds.
SWR2311P(config)#l2ms configuration
SWR2311P(config-l2ms)#l2ms enable
SWR2311P(config-l2ms)#l2ms role master
SWR2311P(config-l2ms)#event-watch interval 60
4.21.14 Set whether to use the L2MS slave's zero config function
[Syntax]
config-auto-set enable
config-auto-set disable
no config-auto-set
110 | Command Reference | Maintenance and operation functions