User Manual

SWR2311P#show firmware-update
url: http://www.rtpro.yamaha.co.jp/firmware/revision-up/swr2311p.bin
timeout: 300 (seconds)
revision-down: Disable
reload-time: -
SWR2311P#
4.23.6 Update firmware from SD card
[Syntax]
firmware-update sd execute [no-confirm] [sd-unmount]
[Keyword]
no-confirm : Don't check for firmware update and SD card mount continuity
sd-unmount : Unmount the SD card without checking before firmware update
[Input mode]
priviledged EXEC mode
[Description]
Execute firmware update using a firmware file stored on the SD card.
If the parameter is not specified, and rewritable firmware exists on the SD card, you will be asked whether to update and
maintain the mounted state of the SD card.
If you want to update the firmware, enter "Y"; if you don't want to update, enter "N."
If you want to maintain the mounted state of the SD card, enter "Y"; if you want to unmount, enter "N."
If you specify no-confirm, the mounted state of the SD card is maintained and the firmware is updated without asking for
confirmation.
If you specify sd-unmount, the SD card is unmounted without asking for confirmation.
[Note]
The firmware file references the "/swr2311p/firmware/swr2311p.bin" file on the SD card.
A revision check is not performed for the firmware file in the SD card and the currently-running firmware.
If you do not remove the SD card, the unit starts up the next time using the firmware that is in the SD card as specified by the
boot prioritize sd command.
The firmware update continues even if you unmount and remove the SD card.
[Example]
Update the firmware using the firmware file on the SD card.
SWR2311P#firmware-update sd execute
Update the firmware.
Current Revision: Rev.2.02.01
New Revision: Rev.2.02.03
Update to this firmware? (Y/N)y
Continue without unmounting the SD card? (Y/N)n
Unmounted the SD card. Pull out the SD card.
Updating...
Finish
SWR2311P#
4.23.7 Set firmware update reload time
[Syntax]
firmware-update reload-time hour [min]
no firmware-update reload-time
[Parameter]
hour : <0-23>
Firmware update reload time (hour)
min : <0-59>
Firmware update reload time (minutes)
Command Reference | Maintenance and operation functions | 115