User Manual

4.24.3 Initialize settings
[Syntax]
cold start
[Input mode]
priviledged EXEC mode
[Description]
Reboots with the factory settings. SYSLOG is also initialized.
[Note]
You must enter the administrator password when executing this command.
A special password can be inputted to initialize the settings only when logging in at the command prompt using a special
password.
[Example]
Initialize the settings.
SWR2311P#cold start
Password:
4.24.4 Mount SD card
[Syntax]
mount sd
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Mounts the SD card.
When you insert an SD card, this command is executed automatically, so you do not need to execute it. If you have unmounted
the card by the unmount sd command, you will need to execute this.
[Note]
The SD card cannot be used if the SD card is in an unmounted state.
[Example]
Mount the SD card.
SWR2311P>mount sd
4.24.5 Unmount SD card
[Syntax]
unmount sd
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Unmounts the SD card.
If this command is not executed, or if the SD card is removed from the SD card slot without executing the unmount process
from the Web GUI, there are some cases in which the operating system will generate a warning to repair the card's file system.
[Note]
The SD card cannot be used if the SD card is in an unmounted state.
[Example]
Unmount the SD card.
SWR2311P>unmount sd
Command Reference | Maintenance and operation functions | 117