User Manual

4.24.6 Set default LED mode
[Syntax]
led-mode default mode
no led-mode default
[Parameter]
mode : Default LED mode
Setting value Description
link-act LINK/ACT mode
poe PoE mode
vlan VLAN mode
status STATUS mode
off OFF mode
[Initial value]
led-mode default link-act
[Input mode]
global configuration mode
[Description]
Set the default LED mode.
When you execute this command, the LEDs are lit in the specified mode. The LEDs are lit in the specified mode even when a
loop is detected in STATUS mode and the loop status has been resolved.
If this command is executed with the "no" syntax, the setting returns to the default.
[Example]
Set the default LED mode to OFF mode.
SWR2311P(config)#led-mode default off
4.24.7 Show LED mode
[Syntax]
show led-mode
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the LED mode setting and status.
The following items are shown.
• Default LED mode setting
•
Current LED mode status
[Example]
Show the LED mode setting and status.
SWR2311P>show led-mode
default mode : off
current mode : link-act
4.24.8 Show port error LED status
[Syntax]
show error port-led
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
118 | Command Reference |
Maintenance and operation functions