User Manual

Hardware is Ethernet
HW addr: 00a0.de00.0000
Description: Connected to router
ifIndex 5001, MRU 1522
Speed-Duplex: auto(configured), 1000-full(current)
Auto MDI/MDIX: on
Vlan info:
Switchport mode : access
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 1
Configured Vlans : 1
Interface counter:
input packets : 320
bytes : 25875
multicast packets: 301
output packets : 628
bytes : 129895
multicast packets: 628
broadcast packets: 0
drop packets : 0
Show the status of VLAN #1.
SWR2311P#show interface vlan 1
Interface vlan1
Hardware is VLAN
Description: Connected to router(VLAN)
ifIndex 301, ARP ageing timeout 1200
IPv4 address 192.168.100.240/24 broadcast 192.168.100.255
(u)-Untagged, (t)-Tagged
VLAN ID Name State Member ports
======= ================================ ======= ======================
1 default ACTIVE port1.1(u) port1.2(u)
port1.3(u) port1.4(u)
port1.5(u) port1.6(u)
port1.7(u) port1.8(u)
5.1.12 Show brief interface status
[Syntax]
show interface brief
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode, individual configuration mode
[Description]
Shows brief interface status.
The following items are shown.
Item Description
Interface Interface name
Type Interface type *2
PVID
VLAN ID that handles untagged frames
*2
Mode
Mode of the switchport *2
• access : untagged
•
trunk : tagged
Status Link status
Reason
Cause of link down
• AD: If shutdown is specified
• ED: If port error is detected
• PD: Other than above
Speed
Communication speed operating status
*2
Command Reference | Interface control | 129